The Wrong Side of the Digital Divide

Residents in an affordable housing high rise in an urban area of Ohio were relying on slow internet (28 Mbps) which they were getting for free, but it was not meeting their bandwidth needs.

A local non-profit group was awarded $20 million to deliver a low-cost internet program throughout the city delivering a minimum of 100 Mbps per customer for a price of $18/month. As part of the award, the group promised to connect a specific number of homes in a very short time frame, so time was of the essence. On their list of properties needing to be upgraded was a specific high rise that provides eligible low-income individuals and families with quality, safe, affordable housing.

Residents in affordable housing units are, in many cases, on the wrong side of the “Digital Divide” because they cannot afford to pay a high monthly fee for high-speed broadband services. Programs are being developed across the United States to address this issue, but it takes time, resources, and the right technology to close the current gap. The high rise was built in 1955 and refurbished in 1990 so the telecommunications wiring in the building is made up of twisted pair phone lines.

The Challenge

The local non-profit group, acting as the ISP, needed to find a solution that would deliver the high-speed broadband services they promised but needed to find a cost-effective way to enable those services utilizing the existing wiring in the building. Installing fiber in a 60-year-old building was not an option because it would have been very expensive and disruptive to the residents. Cable was also not an option because the building was not wired for coax.

The ideal solution would not only be cost-effective but would also meet the grant requirements specified for affordable housing units.

The local non-profit group, acting as the ISP, needed to find a solution that would deliver the high-speed broadband services they promised but needed to find a cost-effective way to enable those services utilizing the existing wiring in the building.

Installing fiber in a 60-year-old building was not an option because it would have been very expensive and disruptive to the residents. Cable was also not an option because the building was not wired for coax.

The ideal solution would not only be cost-effective but would also meet the grant requirements specified for affordable housing units.

The Solution

ESS Networks, a highly experienced telecommunications integrator, was selected to provide the right solution for this critical project. ESS specializes in high-density private housing, government programs, as well as business and residential connections. The ESS team chose to partner with Actelis Networks and deploy the company’s GigaLine 900 solution within the high rise.

ESS Networks, a highly experienced telecommunications integrator, was selected to provide the right solution for this critical project. ESS specializes in high-density private housing, government programs, as well as business and residential connections. The ESS team chose to partner with Actelis Networks and deploy the company’s GigaLine 900 solution within the high rise.

The GigaLine 900 dynamically allocates Gigabit, fiber-grade services to each apartment unit utilizing the existing phone lines or coax within the walls of the building or via Ethernet. It is quick to deploy and a very cost-effective way for ISPs to bring broadband services to residents that need more bandwidth. The solution is environmentally friendly as well, with a power consumption of only 5 watts.

The GigaLine 900 solution is made up of the GL916, a 16-port G.hn PON extender that is typically deployed in the telecom room or basement of the building, and the GL91, a very compact G.hn Ethernet bridge that is placed in each apartment and connected to the customer’s WiFi gateway. Each GL916 can bring services to up to 16 apartments. Multiple GL916’s can be stacked to reach more apartments. The GL91 is able to interface with any WiFi gateway.

In the case of the high rise, service was being delivered into the building by a fixed wireless access point (Siklu mmWave) on the roof. The signal was converted to Ethernet and connected to the GL916 device in the telecom room. Each GL91 was connected to a MikroTik hAP WiFi router in each apartment unit.

The GigaLine 900 dynamically allocates Gigabit, fiber-grade services to each apartment unit utilizing the existing phone lines or coax within the walls of the building or via Ethernet. It is quick to deploy and a very cost-effective way for ISPs to bring broadband services to residents that need more bandwidth. The solution is environmentally friendly as well, with a power consumption of only 5 watts.

The GigaLine 900 solution is made up of the GL916, a 16-port G.hn PON extender that is typically deployed in the telecom room or basement of the building, and the GL91, a very compact G.hn Ethernet bridge that is placed in each apartment and connected to the customer’s WiFi gateway. Each GL916 can bring services to up to 16 apartments. Multiple GL916’s can be stacked to reach more apartments. The GL91 is able to interface with any WiFi gateway.

In the case of the high rise, service was being delivered into the building by a fixed wireless access point (Siklu mmWave) on the roof. The signal was converted to Ethernet and connected to the GL916 device in the telecom room. Each GL91 was connected to a MikroTik hAP WiFi router in each apartment unit.

Before deployment, ESS staff tested the viability of the phone lines. In most instances, ESS was able to utilize the existing twisted pair phone lines to connect each apartment. When that was not possible, their team connected the GigaLine 900 solution with Ethernet cabling.

Before deployment, ESS staff tested the viability of the phone lines. In most instances, ESS was able to utilize the existing twisted pair phone lines to connect each apartment. When that was not possible, their team connected the GigaLine 900 solution with Ethernet cabling.

The Outcome

In a short amount of time, the ESS team was able to deliver broadband services to residents within the high rise, providing much needed bandwidth (with the option for up to 1 Gig symmetrical) for internet access and streaming. Even though residents are paying a very low price for their internet services, the ISP’s return on investment on the Actelis solution is less than 1 year. Additionally, connecting the high rise so quickly means that the non-profit group can move on to connecting other buildings in the city, helping them to keep their stated goals of deploying affordable internet services throughout the city.

Even more importantly, residents in the high rise now have access to services that many people take for granted. They can use the tremendous increase in bandwidth for work, school, and leisure, providing much needed improvement in their way of life.

 

In a short amount of time, the ESS team was able to deliver broadband services to residents within the high rise, providing much needed bandwidth (with the option for up to 1 Gig symmetrical) for internet access and streaming. Even though residents are paying a very low price for their internet services, the ISP’s return on investment on the Actelis solution is less than 1 year. Additionally, connecting the high rise so quickly means that the non-profit group can move on to connecting other buildings in the city, helping them to keep their stated goals of deploying affordable internet services throughout the city.

Even more importantly, residents in the high rise now have access to services that many people take for granted. They can use the tremendous increase in bandwidth for work, school, and leisure, providing much needed improvement in their way of life.

Learn how we enable instant broadband connectivity within MDUs.

Request a presentation from one of our experienced telecommunications specialists.

Yes, Let's Meet!

Modernize. Digitize. Protect.

Actelis helps ISPs modernize their networks in a fast, cost-effective way, while helping to close the digital divide with instant and secure Gigabit services.

Related products

GigaLine 900

• Intelligent XG-PON/Gigabit fiber extender/splitter
• 2.5 Gbps/1 Gbps uplink to support sixteen 1 Gbps customers with symmetrical services over existing copper or coax
• Green solution – Power consumption is less than 5W
• Immediate service turn-up in just a few hours
• High Quality of Experience (QoE)
• Crosstalk free

• Intelligent XG-PON/Gigabit fiber extender/splitter
• 2.5 Gbps/1 Gbps uplink to support up to 16 1 Gbps customers with symmetrical services over existing copper or coax
• Green solution – Power consumption is less than 5W
• Immediate service turn-up in just a few hours
• High Quality of Experience (QoE)
• Crosstalk free

Learn More

The post Instant Broadband for Affordable Housing – Residents go from 28 Mbps to 1 Gig with cost-effective GL900 solution appeared first on Actelis Networks.

Background

Alternetivo is a value-added distributor company with their headquarters in the Czech Republic, but operating in many countries of EU. Their portfolio is broad covering all of the infrastructure needed for ISPs or enterprise customers. From hundreds of manufacturers from all over the world, Alternetivo selects the best innovative products for the construction of modern corporate and operator networks.

Alternetivo has specially trained individuals for many segments and industries across networking needs. They have been chosen by the ChannelWorld awards, as a distributor of the year for 3 consecutive years, the result based on the feedback from customers.

The company specializes in the following technologies: LAN, MAN, WAN, FTTO, FTTx, CWDM, DWDM, Optical cables, Structured cabling systems, Enterprise Wi-Fi, Network security, UTM and NGFW, GPON, Fiber optics, SFP, QSFP, Industrial Ethernet, WLAN, PtP and PtMP wireless, IoT, IP networks, SD-WAN, Environment and Datacenter Monitoring, Switching and routing, and Remote powering.

What is the key to a successful telecoms project?

A dedicated team of individuals leads to a successful project. From the initial contact through the sale, then providing much needed information and expertise through the technical team, to providing the best possible solution and pricing throughout the product management team.

How does Actelis products and services add to Alternetivo's business?

Copper infrastructure is at its peak on many sites, Alternetivo has improved the quality of the overall line with the Actelis products.

What interests you most about the role you have today?

That we can really provide the best advice and solution for the individual needs of the partner.

What excites you about what the future may hold?

Many more completed projects and seeing the technology you delivered to places that you visit for example with your family.

Want to learn more about Alternetivo?

The post Actelis Partner Spotlight: Alternetivo appeared first on Actelis Networks.

FREMONT, Calif., May 6, 2024 — Actelis Networks, Inc. (NASDAQ:ASNS) (“Actelis” or the “Company”), a market leader in cyber-hardened, rapid deployment networking solutions for IoT applications, today announced that it has fulfilled a new order for the City of Bakersfield, California to bring instant, fiber-grade network connectivity to the city’s traffic intersections. This order is part of a city-wide traffic management system modernization project where the Actelis solution enables connectivity from the city’s traffic operations center out to newly installed traffic controllers at each intersection.

Bakersfield is a major city in California with a population of over 400,000. As a significant economic and cultural hub, managing traffic flow and improving traffic safety are both of major importance. One key stated objective the city has in its 2023/2024 plans is to deploy adaptive signal timing which can provide improved travel experiences and a reduction in traffic congestion, leading to safer roadways. However, to enable such a technology to thrive, fiber-grade network connectivity is needed to enable real-time communication between the central control center and individual intersections. Actelis’ patented hybrid-fiber technology was chosen to give the city the fiber-grade performance it needs to achieve its objectives.

The city currently has a mix of fiber and copper wiring existing in its network, which is why the Actelis solution is an ideal choice for Bakersfield. Traditionally, a city would consider replacing the copper in the network with fiber because of performance concerns. However, the cost to deploy new fiber to intersections is expensive and time consuming. Actelis eliminates those costs, as well as the engineering efforts, by providing its patented solution that makes the copper perform like fiber, giving the city one single reliable, secure high-speed network transmitting valuable traffic information to the traffic management system in real-time.

In the future, should the city replace its copper wiring, the Actelis devices can easily be adapted to enable connectivity over fiber. This solution gives cities peace of mind knowing that they have made a long-term investment in their network.

“Bakersfield, like many cities around the world, has legacy copper infrastructure to manage while it also adds new fiber infrastructure,” said Tuvia Barlev, Chairman and CEO of Actelis. “We bring those two worlds together by boosting the performance of the existing copper while we give the city a future path towards fiber with our unique hybrid-fiber technology.”

Actelis partnered with Crosstown Electrical & Data for this project. Crosstown managed the installation of the Actelis solution along with the new traffic controllers. Crosstown specializes in the installation of Electrical and ITS Infrastructure, fiber optics, copper, wireless, communications, and closed-circuit television systems. Over the past 20 years, they have become a trusted network integrator for transportation departments throughout California.

###

About Actelis Networks, Inc.

Actelis Networks, Inc. (NASDAQ: ASNS) is a market leader in cyber-hardened, rapid-deployment networking solutions for wide-area IoT applications including federal, state and local government, ITS, military, utility, rail, telecom and campus applications. Actelis’ unique portfolio of hybrid fiber-copper, environmentally hardened aggregation switches, high density Ethernet devices, advanced management software and cyber-protection capabilities, unlocks the hidden value of essential networks, delivering safer connectivity for rapid, cost-effective deployment. For more information, please visit www.actelis.com.

Forward-looking Statements

This press release contains certain forward-looking statements within the meaning of the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. These statements are identified by the use of the words "could," "believe," "anticipate," "intend," "estimate," "expect," "may," "continue," "predict," "potential," "project" and similar expressions that are intended to identify forward-looking statements. All forward-looking statements speak only as of the date of this press release. You should not place undue reliance on these forward-looking statements. Although we believe that our plans, objectives, expectations and intentions reflected in or suggested by the forward-looking statements are reasonable, we can give no assurance that these plans, objectives, expectations or intentions will be achieved. Forward-looking statements involve significant risks and uncertainties (some of which are beyond our control) and assumptions that could cause actual results to differ materially from historical experience and present expectations or projections. Actual results to differ materially from those in the forward-looking statements and the trading price for our common stock may fluctuate significantly. Forward-looking statements also are affected by the risk factors described in the Company's filings with the U.S. Securities and Exchange Commission. Except as required by law, we undertake no obligation to update or revise publicly any forward-looking statements, whether as a result of new information, future events or otherwise, after the date on which the statements are made or to reflect the occurrence of unanticipated events.

###

Media Contact:

Sean Renn

Global VP Marketing & Communications

srenn@actelis.com

Investor Relations Contact:

Kirin Smith

PCG Advisory, Inc.

Ksmith@pcgadvisory.com

The post Actelis Receives Order and Delivers Instant, Secure Fiber-Grade Networking to Modernize City of Bakersfield, California appeared first on Actelis Networks.

FREMONT, Calif., May 2, 2024 — Actelis Networks, Inc. (NASDAQ:ASNS) (“Actelis” or the “Company”), a market leader in cyber-hardened, rapid deployment networking solutions for IoT applications, today announced that it has received an approximately $2.3 million order to supply Washington D.C.’s Department of Transportation (DDOT) with a new hybrid-fiber intelligent networking solution for the city’s transportation network. This order will be supplied immediately, during the coming 2-3 months and will help DDOT modernize and standardize network connectivity infrastructure along its roadways and at its intersections with the deployment of over 1,600 Actelis hybrid-fiber network switching and aggregation devices.

DDOT currently utilizes a mix of fiber optic and copper cables to communicate with all Intelligent Transportation System (ITS) assets city-wide including traffic signals, Closed Circuit cameras (CCTV), roadway weather systems, and data collection sites. These systems are critical to DDOT’s ability to command and control traffic signals through the evolutionary changes the city is experiencing in enhancing its intelligent, secure transportation management, and to provide situational awareness to the public and a vast number of local and regional stakeholders. These systems are also critical in an ongoing effort to manage traffic flow, special events, and daily incidents that impact the safety of all modes of travel within the city.

The Actelis IoT solution components will communicate with DDOT’s various central systems at the agency’s transportation management centers, the city’s Advanced Traffic Management System (ATMS), and critical homeland security support systems. Because of the importance of the systems involved, it is vital that the connectivity solution is fast, reliable, and secure. Actelis’ unique ability to enable instant fiber-grade connectivity over copper or fiber within one secure integrated network gives DDOT the solution it needs without the high cost of installing fiber at each intersection.

“We are very excited to be able to help the capital of the United States upgrade and modernize its intelligent traffic management systems,” said Tuvia Barlev, Chairman and CEO of Actelis. “We look forward to providing a solution to DDOT that gets the most out of its blended fiber-copper network while helping to make travel safer and more efficient for residents and visitors.”

The project was awarded to M2 Technology, Inc. a top-ranked value-added reseller and a long-time Actelis business partner, providing information technology solutions to local, state, and federal government agencies. The solution will include Actelis’ hybrid-fiber MetaLight 684D managed, cyber and temperature hardened networking technology featuring Gigabit switching capacity and Actelis’ MetaLight 230 compact, high density Ethernet aggregation devices which will be installed in traffic operation hubs spread throughout the District.

###

Related Actelis Intelligent Traffic Management Products

MetaLIGHT 684D

Cyber-Hardened, DIN Rail Switch With 10Gig Switching Capacity, Built for Hybrid Fiber/Copper Networks

MetaLIGHT 230

Compact, high density aggregation switch supporting hybrid networks of fiber and copper

About Actelis Networks, Inc.

Actelis Networks, Inc. (NASDAQ: ASNS) is a market leader in cyber-hardened, rapid-deployment networking solutions for wide-area IoT applications including federal, state and local government, ITS, military, utility, rail, telecom and campus applications. Actelis’ unique portfolio of hybrid fiber-copper, environmentally hardened aggregation switches, high density Ethernet devices, advanced management software and cyber-protection capabilities, unlocks the hidden value of essential networks, delivering safer connectivity for rapid, cost-effective deployment. For more information, please visit www.actelis.com.

Forward-looking Statements

This press release contains certain forward-looking statements within the meaning of the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. These statements are identified by the use of the words "could," "believe," "anticipate," "intend," "estimate," "expect," "may," "continue," "predict," "potential," "project" and similar expressions that are intended to identify forward-looking statements. All forward-looking statements speak only as of the date of this press release. You should not place undue reliance on these forward-looking statements. Although we believe that our plans, objectives, expectations and intentions reflected in or suggested by the forward-looking statements are reasonable, we can give no assurance that these plans, objectives, expectations or intentions will be achieved. Forward-looking statements involve significant risks and uncertainties (some of which are beyond our control) and assumptions that could cause actual results to differ materially from historical experience and present expectations or projections. Actual results to differ materially from those in the forward-looking statements and the trading price for our common stock may fluctuate significantly. Forward-looking statements also are affected by the risk factors described in the Company's filings with the U.S. Securities and Exchange Commission. Except as required by law, we undertake no obligation to update or revise publicly any forward-looking statements, whether as a result of new information, future events or otherwise, after the date on which the statements are made or to reflect the occurrence of unanticipated events.

###

Media Contact:

Sean Renn

Global VP Marketing & Communications

srenn@actelis.com

Investor Relations Contact:

Kirin Smith

PCG Advisory, Inc.

Ksmith@pcgadvisory.com

The post Actelis Receives $2.3 Million Order for Immediate Delivery of New Hybrid-Fiber Intelligent Networking Solution For Washington D.C.’s Department of Transportation appeared first on Actelis Networks.

Eliminating the Need for Rewiring & Tenant Disruption

Millions of MDUs Remain Unconnected to Broadband Services

Tens of millions of multi-dwelling units (MDUs) around the world remain unserved or underserved with broadband services. Deployment of broadband services for multi-dwelling units (especially older MDUs) has been a challenge for providers for a number of reasons but when those challenges are overcome, there is great revenue potential because of the number of subscribers living within one building.

67%

of US multi-family housing buildings were built before 1980¹ and are not likely to be wired for fiber.

46%

of the European population lives in a flat² providing a very large addressable market.

$500 to
$1,000

cost per door to rewire a building for fiber³ (varies by region)

$700 to
$900

average monthly lost revenue by not serving a 16 unit building⁴ (varies by region)

Current Challenges

1. There are many existing and potential customers living within MDUs that providers cannot serve today with Gigabit services

A provider may have successfully deployed fiber to a building or installed a fixed wireless antenna on the roof but that is only half the battle. The majority of multi-family buildings do not have available fiber within the walls of the building, which may be limiting potential revenue opportunities because Gigabit services cannot be deployed.

2. Rewiring a building with fiber

• High Cost: Wiring a building for fiber can cost up to $1,000 per door depending on where the building is located. This is a large amount of money that needs to be invested upfront with no guaranteed ROI timeline.
• Time: Building rewiring takes time away from deploying other projects. There is pre-planning with the landlord and IT staff, design work, and installation, all of which takes the focus away from other revenue generating opportunities.
• Landlord: The landlord may not want to incur the cost of rewiring the building or may not approve because it could disrupt the lifestyle of the tenants.

1. There are many existing and potential customers living within MDUs that providers cannot serve today with Gigabit services

A provider may have successfully deployed fiber to a building or installed a fixed wireless antenna on the roof but that is only half the battle. The majority of multi-family buildings do not have available fiber within the walls of the building, which may be limiting potential revenue opportunities because Gigabit services cannot be deployed.

2. Rewiring a building with fiber

• High Cost: Wiring a building for fiber can cost up to $1,000 per door depending on where the building is located. This is a large amount of money that needs to be invested upfront with no guaranteed ROI timeline.
• Time: Building rewiring takes time away from deploying other projects. There is pre-planning with the landlord and IT staff, design work, and installation, all of which takes the focus away from other revenue generating opportunities.
• Landlord: The landlord may not want to incur the cost of rewiring the building or may not approve because it could disrupt the lifestyle of the tenants.

The Solution

Instant Fiber-Grade Gigabit MDU Connectivity
Utilizing Existing Coax or Telephone Wires

Instant Fiber-Grade Gigabit MDU Connectivity
Utilizing Existing Coax or Telephone Wires

It doesn’t matter how you get to the building.

Actelis distributes Gigabit services throughout the building.

A Hybrid Approach To Networking

Actelis’ hybrid-fiber technology takes in the fiber or Ethernet connection running to the building. It extends that connectivity over the wiring already available in the building, either copper or coax, to give customers the most cost-effective time-to-market solution to deliver broadband services.

Fiber-Grade Performance Over Existing Wiring

The Actelis solution boosts the performance of the existing copper or coax to give it the speed and quality of fiber. With our patented technology, Gigabit speeds can be achieved and interference is removed.

A Hybrid Approach To Networking

Actelis’ hybrid-fiber technology takes in the fiber or Ethernet connection running to the building. It extends that connectivity over the wiring already available in the building, either copper or coax, to give customers the most cost-effective time-to-market solution to deliver broadband services.

Fiber-Grade Performance Over Existing Wiring

Actelis’ hybrid-fiber technology takes in the fiber or Ethernet connection running to the building. It extends that connectivity over the wiring already available in the building, either copper or coax, to give customers the most cost-effective time-to-market solution to deliver broadband services.

GL900 Multiplexer

• Intelligent XG-PON/Gigabit fiber extender/splitter over copper or coax
• Green solution – Power consumption is less than 5W
• Immediate service turn-up in less than 1 hour
• 10X less costly than a pure fiber installation
• 2.5 Gbps/1 Gbps uplink to support up to 16 1 Gbps customers with symmetrical services
• Utilizes G.hn technology
• High Quality of Experience (QoE)
• Provides an easily replicable solution for additional MDUs

In-Building Gigabit Solution for MDUs

GigaLine 900

• Intelligent XG-PON/Gigabit fiber extender/splitter over copper or coax
• Green solution – Power consumption is less than 5W
• Immediate service turn-up in less than 1 hour
• 10X less costly than a pure fiber installation

• 2.5 Gbps/1 Gbps uplink to support up to 16      1 Gbps customers with symmetrical services
• Utilizes G.hn technology
• High Quality of Experience (QoE)
• Provides an easily replicable solution for additional MDUs

Example MDU Deployments with GigaLine 900

Use Case #1

Fiber to the Building

• GigaLine 900 (GL900) installed in basement.
• The GL900 unit can be reversed powered, eliminating the need for a dedicated power source.
• Each GL900 connects up to 16 units utilizing existing copper or coax. Scale the solution for smaller or larger buildings.
• Gigabit broadband services are dynamically allocated.
• Downstream and Upstream ratio are automatically responsive for each customer.

• GigaLine 900 (GL900) installed in basement.
• The GL900 unit can be reversed powered, eliminating the need for a dedicated power source.
• Each GL900 connects up to 16 units utilizing existing copper or coax. Scale the solution for smaller or larger buildings.
• Gigabit broadband services are dynamically allocated.
• Downstream and Upstream ratio are automatically responsive for each customer.

Use Case #2

Fixed Wireless to the Building

• Wireless antenna on roof or side of building.
• Ethernet cable installed indoor or outdoor connects to GL900 installed within building.
• GL900 unit can be reverse powered, eliminating need for a power source.
• Each GL900 connects up to 16 units utilizing existing copper or coax. Scale the solution for smaller or larger buildings.
• Gigabit broadband services are dynamically allocated.
• Downstream and Upstream ratio are automatically responsive for each customer.

• Wireless antenna on roof or side of building.
• Ethernet cable installed indoor or outdoor connects to GL900 installed within building.
• The GL900 unit can be reversed powered, eliminating the need for a dedicated power source.
• Each GL900 connects up to 16 units utilizing existing copper or coax. Scale the solution for smaller or larger buildings.
• Dynamically allocated Gigabit broadband services.
• Downstream and Upstream ratio are automatically responsive for each customer.

Key Benefits

of Actelis' Broadband Solutions for
Multi- Dwelling Units

of Actelis' Broadband Solutions for Multi- Dwelling Units

Broadband services enabled in just one hour

Expand your reach and coverage where fiber deployment is cost prohibitive

See a return on your investment in just a few months

Environmentally friendly solution

Benefit	How?
Instant new revenue and fast ROI	No waiting for fiber to be deployed through the building. Get broadband connectivity in less than 1 hour in MDUs that are unserved or underserved with a solution that pays for itself in just a few months. Also reduces customer churn by offering a superior solution.
Saves up to 10X the cost of building rewiring	Rewiring a building for fiber can cost up to $1,000 per door. Save that money by deploying the GigaLine 900 for a significantly lower cost.
Repeatability and no construction	Installation of the GL900 requires no construction. Just put it in the basement and connect it with the existing wiring. This can be done in any building that has existing copper or coax so deployment is easy to replicate for additional buildings.
Very satisfied landlords	Installation of the GL900 solution causes no disruption to the lifestyle of the tenants. No noises, no need to enter their apartments. You will make landlords very happy.
Decreased carbon footprint	The GigaLine 900 utilizes only 5W of power which is 95% less than comparable solutions. Go green with Actelis!

Connect with Actelis!

Want to learn more about how to enable instant and reliable broadband services for multi-dwelling units?

Request a presentation from one of our experienced broadband representatives.

Request a Presentation

References

1. GITNUX MARKETDATA REPORT 2024: Must-Know Multifamily Housing Statistics
2. European Union eurostat: House or flat: where do you live?
3. Progressive Office Cabling
4. The Cost of Global Connectivity 2020: Source NewAmerica (based on average cost worldwide)

The post Enabling Instant & Reliable Broadband Services For Multi-Dwelling Units   appeared first on Actelis Networks.

Safer Roads & More Prosperity

Too many people die on roadways, the cost of traffic congestion is in the billions, and the transportation industry is one of the largest contributors to greenhouse emissions. Technologies exists to fix these issues but the lack of secure high-speed network connectivity along highways to connect these devices together is holding transportation agencies back from making the progress necessary to see real change.

Current Challenges

1. There is a lack of fiber-grade network connectivity and power sources along highways to properly support:

• Driver, passenger, and pedestrian safety
• Improved traffic flow & reduced congestion
• Faster response time for emergency vehicles
• Real-time information about traffic conditions and traffic behavior
• Mainstream roll-out of autonomous vehicles
• Reduction in greenhouse gas emissions

2. High cost to install fiber along roadways

The cost of new fiber infrastructure to cover 100% of a highway system is enormous and the time it takes to deploy such a network can take years. The longer and more remote the highway system is, the more cost and time must be built into a project.

3. Road monitoring regulations are becoming stricter

Countries are now mandating more road cameras per mile, 24/7 monitoring, enforcement of using new High-quality IP cameras and the implementation of emergency VoIP phone points every 1-2 miles. Upgrading the network to comply with these regulations without fiber connectivity or power is a major challenge.

4. Cyber attacks are a constant threat to the transportation network

The transportation industry is becoming more and more dependent on interconnected digital systems which means that the risk of cyberattacks is rising. With autonomous vehicles becoming more mainstream, this threat is a true safety related issue that cannot be ignored.

An Overnight Solution to A Long Term Problem

Secure, fiber-grade connectivity is the literal conduit for expanding the utilization of traffic management devices. Networking these devices together to monitor traffic flow, detect vehicles at various points in their journey, and deliver real-time information to traffic operators and to drivers is critical for safety and congestion reduction. The Actelis solution is unique because it enables this connectivity in just hours (and powers devices over ethernet), with no construction or engineering costs and is cyber-hardened to help protect the network at the edge.

A Hybrid Approach To Networking

The wiring in most networks consists of a mix of fiber and twisted pair copper. The existing wiring in a traffic network is ultra-valuable and can be reused to bring more traffic management devices online. Actelis works with traffic departments to help them take full advantage of their existing wiring and allows them to manage one integrated hybrid-fiber network.

Extending Your Fiber Reach

Actelis’ hardened fiber-optic and hybrid-fiber switches provide a wide range of features to maximize your fiber deployment. Transportation departments can extend their networks for miles and miles, instantly connecting more and more devices.

Fiber-Grade Over Copper Performance

The Actelis solution boosts the performance of copper to give it the speed and quality of fiber. With our patented technology, Gigabit speeds can be achieved and the transmission is synchronized to remove interference.

Fiber-grade connectivity & power over Ethernet deployed in just hours

Connect locations where fiber installation is cost prohibitive

Securing the network’s edge with end-to-end encryption protocols

Saves up to 80% compared to a new fiber deployment

Example Topology of a Hybrid-Fiber Network

Key Benefits of the Actelis Solution for Highways

Benefit	How?
Up to 80% cost savings	Installing new fiber to all locations along a highway costs hundreds of thousands of dollars. By utilizing available copper in the network, these costs are eliminated.
Faster project completion	Many projects get slowed down by waiting for budget approval, permitting, engineering and installation. The wiring in your network will be used by Actelis to help you avoid these long delays.
Increased Safety	The faster you deploy network connectivity, the faster you can install cameras, sensors, messaging signs and more to collect data, and communicate better with drivers.
Lower Pollution	Improved network connectivity at more highway locations enables traffic departments to put the technology in place to ease traffic congestion and monitor pollution levels.
Prevention from Cyber Attacks	End-to-end protection through Actelis’ triple shield solution, providing high-end encryption protocols, data fragmentation and scrambling.

Ready for V2X?

The utilization of autonomous vehicles is promising, especially because of the expected safety and environmental benefits. However, for autonomous vehicles to become mainstream, reliable V2X (Vehicle-to-Everything) network connectivity along highways needs to be deployed.

Vehicles need to be able to “talk” with each other, as well with devices such as cameras, sensors, and messaging signs, to ensure the safety and efficiency of the system.

The Actelis hybrid-fiber solution is the perfect choice to expedite a V2X network because it can deliver the needed bandwidth and reliability immediately over any wireline medium.

Want to Learn More About How To Get Instant and Secure Fiber-Grade Network Connectivity Along Highways?

Request a presentation from one of our experienced Intelligent Transportation solutions experts.

Click Here

References

1. Centers for Disease Control and Prevention – Road Traffic Injuries and Deaths—A Global Problem: Global Road Safety | Features | Injury Center | CDC
2. American Transportation Research Institute: Trucking’s Annual Congestion Costs Top $94.6 Billion (truckingresearch.org)
3. United States Environmental Protection Agency – Sources of Greenhouse Gas Emissions: Sources of Greenhouse Gas Emissions | US EPA

Modernize. Digitize. Protect.

Actelis enables secure and resilient broadband connectivity solutions for Smart Cities- ITS, IoT, Industrial IoT and municipal broadband networks.

Related products

MetaLIGHT 510D/5114D

• Compact, Din Rail, Fiber Gigabit Switches
• Managed
• Temperate hardened
• 10 to 14 ports
• Power over Ethernet (Poe)
• Supports drop and continue, as well as linear and fast healing ring topologies.

Read More

MetaLIGHT 684Dx

• Enables Gigabit speeds over copper or fiber
• Managed hybrid fiber-copper switch with pass through relay
• Temperature hardened
• 8 ports
• Serial to IP converter
• Optional Power over Ethernet (PoE++)
• Optional 256-bit MACsec encryption

Read More

GigaLine 5030x

• 12 port managed DIN Rail Ethernet switch
• Supports four 10 Gigabit interfaces
• Temperature hardened
• Cyber hardened
• Power over Ethernet (POE) up to 8 ports
• Optional PoE++

Read More

GigaLine 5060x

• 20 Port managed DIN Rail Ethernet switch
• Up to four 10 Gigabit interfaces
• Cyber and Temperature Hardened
• Layer 2 and Layer 3 capabilities
• Power over Ethernet (POE)

Read More

MetaLIGHT 230

The MetaLIGHT 230 serves as a Central Office aggregator in a Point-to-Multipoint topology connecting to multiple fiber, copper, or hybrid fiber-copper switches.

Read More

MetaASSIST EMS

With Actelis MetaAssist, network operators can rapidly deploy and scale while reducing operational expenses and complexity. 

Read More

View Our Solutions Portfolio

The post Fulfilling The Need for Immediate and Secure Fiber-Grade Network Connectivity Along Highways appeared first on Actelis Networks.

FREMONT, Calif., February 29, 2024 — Actelis Networks, Inc. (NASDAQ:ASNS) (“Actelis” or the “Company”), a market leader in cyber-hardened, rapid deployment networking solutions for IoT applications, today announced that it has achieved U.S. Department of Commerce National Institute of Standards and Technology (NIST) certification for FIPS 140-2 cryptographic standard. NIST’s FIPS is a standard for the protection of sensitive or valuable data within Federal government systems and is mandatory for federal agencies, contractors, and vendors. Additionally, NIST standards are utilized by non-government organizations looking to establish strong information security programs.

This important achievement follows Actelis’ announcement in September 2023 that it achieved third party validation for FIPS which was a necessary first step towards certification. To achieve certified status, Actelis underwent a rigorous approval process, collaborating closely with its partner, WolfSSL, a leader in embedded software security. WolfSSL’s cryptography library has been validated on many leading operating environments such as Dell, Intel, Samsung, and Sony.

“NIST standards are recognized and followed globally for public agencies and private organizations,” said Tuvia Barlev, Chairman & CEO of Actelis. “Since Actelis solutions are built to be installed within critical infrastructure networks, we will be able to leverage this achievement to facilitate our global business development activities throughout a variety of industries.”

Actelis’ solutions are deployed in over 40 countries for a wide range of applications. The company’s hybrid-fiber devices can be found in major international airports, along national highways and railways, within the network of smart cities and large energy providers, and on military bases. These networks are all vulnerable to cyber-attacks, especially at the edge of the networks where IoT devices such as sensors and cameras are installed. Actelis is trusted by network providers to safely transport critical data between these devices and the customers’ network operations centers.

Actelis not only helps secure its customers’ networks, it also makes it possible to deploy Gigabit fiber-grade connectivity in just hours. By utilizing the fiber or wiring already installed in the network, Actelis can quickly enable and extend secure fiber quality data transmissions even to distant and remote locations. Customers save a tremendous amount of time and money because they avoid the costs associated with engineering, construction and permitting.

“Operators have to continuously expand their networks to allow for the addition of new devices and systems,” said Tuvia Barlev, Chairman and CEO of Actelis. “We give them peace of mind knowing that our solution has achieved critical cyber-security certifications and that we can help them complete their networking projects without having to worry about installing miles of new cabling.”

###

About Actelis Networks, Inc.

Actelis Networks, Inc. (NASDAQ: ASNS) is a market leader in cyber-hardened, rapid-deployment networking solutions for wide-area IoT applications including federal, state and local government, ITS, military, utility, rail, telecom and campus applications. Actelis’ unique portfolio of hybrid fiber-copper, environmentally hardened aggregation switches, high density Ethernet devices, advanced management software and cyber-protection capabilities, unlocks the hidden value of essential networks, delivering safer connectivity for rapid, cost-effective deployment. For more information, please visit www.actelis.com.

Forward-looking Statements

This press release contains certain forward-looking statements within the meaning of the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. These statements are identified by the use of the words "could," "believe," "anticipate," "intend," "estimate," "expect," "may," "continue," "predict," "potential," "project" and similar expressions that are intended to identify forward-looking statements. All forward-looking statements speak only as of the date of this press release. You should not place undue reliance on these forward-looking statements. Although we believe that our plans, objectives, expectations and intentions reflected in or suggested by the forward-looking statements are reasonable, we can give no assurance that these plans, objectives, expectations or intentions will be achieved. Forward-looking statements involve significant risks and uncertainties (some of which are beyond our control) and assumptions that could cause actual results to differ materially from historical experience and present expectations or projections. Actual results to differ materially from those in the forward-looking statements and the trading price for our common stock may fluctuate significantly. Forward-looking statements also are affected by the risk factors described in the Company's filings with the U.S. Securities and Exchange Commission. Except as required by law, we undertake no obligation to update or revise publicly any forward-looking statements, whether as a result of new information, future events or otherwise, after the date on which the statements are made or to reflect the occurrence of unanticipated events.

###

Media Contact:

Sean Renn

Global VP Marketing & Communications

srenn@actelis.com

Investor Relations Contact:

Kirin Smith

PCG Advisory, Inc.

Ksmith@pcgadvisory.com

The post Actelis Achieves National Institute of Standards and Technology (NIST) Certification for Data Cyber Security appeared first on Actelis Networks.

FREMONT, Calif., February 1, 2024 — Actelis Networks, Inc. (NASDAQ:ASNS) (“Actelis” or the “Company”), a market leader in cyber-hardened, rapid deployment networking solutions for IoT applications, today announced that its hybrid-fiber connectivity solution has been recently deployed at traffic intersections throughout the City of Napa, California. Actelis’ local partner, Econolite, ordered and installed the solution, completing an Advanced Traffic Management System (ATMS) upgrade project at some of the busiest intersections in the city.

The City of Napa is the cultural center of California wine country, and its vibrant downtown is home to many local restaurants, wine tasting rooms, boutiques, and public art installments. Like many popular destinations where there is a strong combination of drivers, bikers, and pedestrians, Napa is very concerned with traffic safety. In September 2022, City Council adopted Napa’s Local Roadway Safety Plan (LRSP) which created a framework to systematically identify and analyze traffic safety related issues and recommend projects and countermeasures. Two key elements of the LRSP are:

1. It is a data-driven safety plan, so the collection of data is ultra-important.
2. Improvements to the city’s traffic signal timing (e.g. the coordination of the length of red, yellow, and green lights) needed to occur.

Sitting inside the city’s traffic cabinets, the newly installed Actelis hybrid-fiber switches provide fiber-grade connectivity to the intersection, transporting critical traffic related information back to the city’s traffic operations center. In order to reduce the number of collisions, traffic signal patterns can be modified, and Actelis’ system enables the city to make remote signal timing changes as needed.

The City of Napa and Econolite chose Actelis for this important project for two main reasons – networking flexibility and security. From a networking perspective, the City has fiber at some of its intersections and copper at others. Actelis’ hybrid-fiber switches and MetaASSIST Element Management System are uniquely designed to drive fiber-grade services over fiber OR existing copper while managing a mixed fiber/copper network. This flexible solution saves many months of permitting and civil works that is typically required for new fiber construction in locations where fiber is not currently installed. Faster project deployment, along with savings of hundreds of thousands of dollars on labor and construction equipment, makes Actelis the perfect choice for Napa.

The city has high standards for network security and works closely with its vendors to ensure that proper security settings are in place. Actelis has engineered its devices with secure data delivery algorithms,  helping to keep city networks safe, especially at the edge of the network where IoT devices are vulnerable.

“We pride ourselves on getting the most out of the network infrastructure that is already available and shielding the network from attacks,” said Tuvia Barlev, Chairman and CEO of Actelis. “Our ability to boost the performance of existing copper to fiber quality as well as the capability to extend fiber connectivity within the same network, while utilizing cyber-hardened protocols, makes us unique and helps our customers lower their network infrastructure costs and accelerate project timelines.”

###

About Actelis Networks, Inc.

Actelis Networks, Inc. (NASDAQ: ASNS) is a market leader in cyber-hardened, rapid-deployment networking solutions for wide-area IoT applications including federal, state and local government, ITS, military, utility, rail, telecom and campus applications. Actelis’ unique portfolio of hybrid fiber-copper, environmentally hardened aggregation switches, high density Ethernet devices, advanced management software and cyber-protection capabilities, unlocks the hidden value of essential networks, delivering safer connectivity for rapid, cost-effective deployment. For more information, please visit www.actelis.com.

Forward-looking Statements

This press release contains certain forward-looking statements within the meaning of the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. These statements are identified by the use of the words "could," "believe," "anticipate," "intend," "estimate," "expect," "may," "continue," "predict," "potential," "project" and similar expressions that are intended to identify forward-looking statements. All forward-looking statements speak only as of the date of this press release. You should not place undue reliance on these forward-looking statements. Although we believe that our plans, objectives, expectations and intentions reflected in or suggested by the forward-looking statements are reasonable, we can give no assurance that these plans, objectives, expectations or intentions will be achieved. Forward-looking statements involve significant risks and uncertainties (some of which are beyond our control) and assumptions that could cause actual results to differ materially from historical experience and present expectations or projections. Actual results to differ materially from those in the forward-looking statements and the trading price for our common stock may fluctuate significantly. Forward-looking statements also are affected by the risk factors described in the Company's filings with the U.S. Securities and Exchange Commission. Except as required by law, we undertake no obligation to update or revise publicly any forward-looking statements, whether as a result of new information, future events or otherwise, after the date on which the statements are made or to reflect the occurrence of unanticipated events.

###

Media Contact:

Sean Renn

Global VP Marketing & Communications

srenn@actelis.com

Investor Relations Contact:

Kirin Smith

PCG Advisory, Inc.

Ksmith@pcgadvisory.com

Actelis Intelligent Traffic Management Products

MetaLIGHT 684D

Cyber-Hardened, DIN Rail Switch With 10Gig Switching Capacity, Built for Hybrid Fiber/Copper Networks

MetaLIGHT 510DX/5114D

14-Port, Hardened, Industrial Managed Ethernet Switch with PoE

GigaLine 5070

Ruggedized 20-Port, Managed, 10 Gigabit L2/L3 Ethernet Switch.

The post Actelis Receives Order For City of Napa Intelligent Traffic Management System appeared first on Actelis Networks.

FREMONT, Calif., December 14, 2023 (GLOBE NEWSWIRE) -- Actelis Networks, Inc. (NASDAQ:ASNS) (“Actelis” or the “Company”) a market leader in cyber-hardened, rapid deployment networking solutions for IoT applications, today announced the official launch of the cyber and temperature hardened GigaLine 800 Hybrid-Fiber, last mile broadband networking solution. This new solution is designed to help network operators solve the challenge of deploying multi-Gigabit connectivity over thousands of feet in a secure, instantaneous, and economical manner by extending fiber connectivity utilizing existing copper and coax wiring. Now, without the need to wait for fiber availability, millions of homes and businesses can be connected immediately to broadband services generating new revenue opportunities for providers. Additionally, with GigaLine 800, operators of smart rail, smart campus, smart city as well as industrial and military networks have a fast path to completing their IoT projects on time and under budget.

Instant, Cost-Effective Deployment of Secure Multi-Gigabit Connectivity Over Extended Distances Is Now Possible With the GigaLine 800 Series

In recent years, network providers have made strong progress in deploying fiber, however, in millions of cases it has not been economical to install fiber all the way to a building, a specific location or device. For example, today fiber is installed nearby or “passes” approximately half of the primary homes in the United States, however, less than half of those homes in buildings that are “passed” by fiber are actually connected to the fiber outside. Getting fiber all the way to a home or business is expensive and time consuming due to construction costs, labor shortages, permitting issues and landlord-carrier friction. Actelis’ new GigaLine 800 aims at extending the fiber connection to all the buildings that fiber does not reach and helps get broadband services all the way through to homes or offices. Installation is instant and low cost by utilizing the wiring that is already present in the building. Similarly, all IoT applications that require secure, high speed, long reach connectivity to cameras, radars, small wireless or Wi-Fi base stations, or other devices may enjoy similar advantages.

The GigaLine 800 solution delivers 5 Gbps over the last 1,000 feet and 1 Gbps over the last 3,000 feet closing the gap between the fiber termination point and the out of fiber reach building. The installation process is simple, saving providers the time and cost of digging up concrete while eliminating the need to obtain permits. The GigaLine 800 can be configured for point-to-point or point-to-multi-point applications, with capability to connect multiple buildings or IoT devices from one unit.

Actelis places high importance on network security when designing its products which is why it incorporated high-end security protocols into the GigaLine 800. The device features 256-bit MACsec encryption and integrates seamlessly with Actelis’ encrypted MetaASSIST element management system to offer protection at the switching, transmission, and network management levels. The GigaLine 800 also supports FIPS cyber-security standards as required by DoD for sensitive applications.

“There is a growing demand in the market to get multi-Gigabit connectivity to unserved and underserved locations but in many cases running fiber takes many months to deliver, and the cost has been way too high to make it happen,” said Tuvia Barlev, chairman and CEO of Actelis. “Until now, millions of people have been denied broadband services and we believe that the GigaLine 800 will be used to solve that problem immediately.”

As previously reported, Actelis showcased its new GigaLine 800 solution at the Broadband Communities Summit in May 2023, helping to generate interest from local and state agencies as well as network providers and system integrators. A recent order has been received by a global integrator of infrastructure, demonstrating the appeal of the GigaLine 800 in the market.

Related Solutions

About Actelis Networks – Modernize. Digitize. Protect.

Actelis Networks, Inc. (NASDAQ: ASNS) is a market leader in cyber-hardened, rapid-deployment networking solutions for wide-area IoT applications including federal, state and local government, ITS, military, utility, rail, telecom and campus applications. Actelis’ unique portfolio of hybrid fiber-copper, environmentally hardened aggregation switches, high density Ethernet devices, advanced management software and cyber-protection capabilities, unlocks the hidden value of essential networks, delivering safer connectivity for rapid, cost-effective deployment. For more information, please visit www.actelis.com.

Forward-looking Statements

This press release contains certain forward-looking statements within the meaning of the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. These statements are identified by the use of the words "could," "believe," "anticipate," "intend," "estimate," "expect," "may," "continue," "predict," "potential," "project" and similar expressions that are intended to identify forward-looking statements. All forward-looking statements speak only as of the date of this press release. You should not place undue reliance on these forward-looking statements. Although we believe that our plans, objectives, expectations and intentions reflected in or suggested by the forward-looking statements are reasonable, we can give no assurance that these plans, objectives, expectations or intentions will be achieved. Forward-looking statements involve significant risks and uncertainties (some of which are beyond our control) and assumptions that could cause actual results to differ materially from historical experience and present expectations or projections. Actual results to differ materially from those in the forward-looking statements and the trading price for our common stock may fluctuate significantly. Forward-looking statements also are affected by the risk factors described in the Company's filings with the U.S. Securities and Exchange Commission. Except as required by law, we undertake no obligation to update or revise publicly any forward-looking statements, whether as a result of new information, future events or otherwise, after the date on which the statements are made or to reflect the occurrence of unanticipated events.

Media Contact:
Sean Renn
Global VP Marketing & Communications
srenn@actelis.com

Investor Relations Contact:
Kirin Smith
PCG Advisory
ksmith@pcgadvisory.com

The post Actelis Announces Order Received and Launch of New Last Mile Hybrid-Fiber Multi-Gigabit Broadband Solution For Buildings and IoT Applications appeared first on Actelis Networks.

FREMONT, Calif., December 6, 2023 (GLOBE NEWSWIRE) -- Actelis Networks, Inc. (NASDAQ:ASNS) (“Actelis” or the “Company”) a market leader in cyber-hardened, rapid deployment networking solutions for IoT applications, today announced that it has received and has delivered a new order for multi-gigabit hybrid fiber-copper networking devices to help support the City of Everett’s growing intelligent traffic management network. Actelis continues its success with trusted ITS channel partner, Western Systems, who works with the city’s traffic engineering department on traffic device deployments.

Everett, the seventh largest city in Washington State, has an ambitious Transportation Modernization Program covering a host of planned improvements, many of which focus on transportation safety and smart traffic enhancements. Actelis’ integrated hybrid fiber-copper networking platform helps Everett and cities around the world to advance their traffic management and safety initiatives by enabling and extending secure, fiber-grade connectivity at traffic intersections with deployment in just hours. Cameras, sensors, traffic controllers and more can be connected immediately utilizing the new fiber or the existing legacy copper wiring in the traffic cabinet, and enjoying fiber-grade connectivity for either option.

Actelis’ ML684D, a part of the company’s MetaLight product family, are weather hardened, multi-gigabit network switches that transport critical traffic related information to the city traffic operations center. A cyber-hardened solution featuring 256-bit MACsec encryption, the ML684D is the perfect choice for cities looking for a secure, fast, and cost-effective way to connect blended networks of fiber and copper. The device delivers the flexibility that cities are looking for by providing the functionality of a fiber switch, a copper switch, a Power over Ethernet switch, and a Serial to IP converter in one compact form factor.

The MetaLight products are integrated into Actelis’ encrypted Element Management Software (EMS) providing cities with the ability to automatically configure and quickly deploy Actelis’ advanced networking building blocks throughout their network. Actelis’ EMS also provides cities with an easy way to monitor Actelis, as well as 3^rd party, network elements to ensure high uptime of the system.

“We are very appreciative of the City of Everett’s and Western Systems’ confidence in our solutions,” said Tuvia Barlev, Chairman and CEO of Actelis. “We look forward to working with their teams to provide the tools needed to effectively manage traffic around the city while achieving all safety goals.”

This project is another great example of Actelis’ partnership with Western Systems, a leader in the traffic industry since 2001. Western Systems has deployed Actelis solutions in many cities in the United States including Eugene (Oregon), San Jose (California), and Tacoma (Washington). Their team provides everything a city needs to run its intersections, including custom traffic cabinets, advanced transportation management systems, controllers, detection, communications, signals & hardware, cameras and more.

Related Products

About Actelis Networks – Modernize. Digitize. Protect.

Actelis Networks, Inc. (NASDAQ: ASNS) is a market leader in cyber-hardened, rapid-deployment networking solutions for wide-area IoT applications including federal, state and local government, ITS, military, utility, rail, telecom and campus applications. Actelis’ unique portfolio of hybrid fiber-copper, environmentally hardened aggregation switches, high density Ethernet devices, advanced management software and cyber-protection capabilities, unlocks the hidden value of essential networks, delivering safer connectivity for rapid, cost-effective deployment. For more information, please visit www.actelis.com.

Forward-looking Statements

This press release contains certain forward-looking statements within the meaning of the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. These statements are identified by the use of the words "could," "believe," "anticipate," "intend," "estimate," "expect," "may," "continue," "predict," "potential," "project" and similar expressions that are intended to identify forward-looking statements. All forward-looking statements speak only as of the date of this press release. You should not place undue reliance on these forward-looking statements. Although we believe that our plans, objectives, expectations and intentions reflected in or suggested by the forward-looking statements are reasonable, we can give no assurance that these plans, objectives, expectations or intentions will be achieved. Forward-looking statements involve significant risks and uncertainties (some of which are beyond our control) and assumptions that could cause actual results to differ materially from historical experience and present expectations or projections. Actual results to differ materially from those in the forward-looking statements and the trading price for our common stock may fluctuate significantly. Forward-looking statements also are affected by the risk factors described in the Company's filings with the U.S. Securities and Exchange Commission. Except as required by law, we undertake no obligation to update or revise publicly any forward-looking statements, whether as a result of new information, future events or otherwise, after the date on which the statements are made or to reflect the occurrence of unanticipated events.

Media Contact:
Sean Renn
Global VP Marketing & Communications
srenn@actelis.com

Investor Relations Contact:
Kirin Smith
PCG Advisory
kirin@pcgadvisory.com
646-823-8656

The post Actelis Receives Order For Networking Of Traffic Management and Safety IoT Applications In The City of Everett, Washington appeared first on Actelis Networks.